How to Use Sunflower Shelling Equipment

As technology advances, economic development, purchase of sunflower shelling equipment more and more, but there are a lot of customers because there is no real master the correct use of sunflower shelling equipment, here are some successful experiences for the benefit of promotion sunflower shelling equipment.

 

 

 

Good use of sunflower shelling equipment several preconditions

Suitable for wet and dry sunflower: too dry crushing rate, high wet then affect efficiency. Rural general store sunflower too dry, must pay attention to when the shelling frequency of the motor, to ensure that the whole kernel rate.

The power supply voltage can not be lower. If you want the motor is working properly, the voltage required to achieve its rated voltage. Usually a rural village only a transformer, while farmers and the dispersion is located, in addition to not very standard with wires and circuits, resulting in insufficient voltage from the transformer further away. Undervoltage influence husking rate, and easy to shorten equipment life.

 

Methods of operation and precautions

Before use, you should first check whether the fastener tightening, the rotating part is flexible, if there is in each bearing grease, shelling whether the unit is placed on a stable surface. Supply voltage switch must be in the off position.

When, after starting the motor, the rotor should be referred to in the same direction with the steering equipment on. To idle a few minutes to observe any abnormal sound, confirmed in normal operation, only the material production. When sunflower kernels containing skin increase the amount of wind adjustable. Production, the vibration motor farther away from the people to avoid injury. Equipment should always clear the screen surface dirt and remnants of grain and other debris. To ensure that the selection of sunflower kernels effect. Equipment when not in use must be covered, placed in dry warehouse, avoid the sun and rain.